Fitting The Door Handles - AEG Electrolux SANTO S80408-KG8 Gebrauchsanweisung

Fitting the Door Handles

To keep the amount of packaging down and to reduce the size for
transporting, the door handles are not mounted when the appliance is
delivered.
1
Caution! Do not overtighten the screws (max. 2 Nm) as you may
damage the door handles.
The handles are packed separately on the padding in front of the door,
the brackets and screws inside the appliance.
To mount, lay the appliance carefully on its back, if necessary. Use a
piece of padding or a blanket as protection under the appliance.
0 1. Screw the top door bracket to the
door handle (1). Mount the
bottom door bracket to the
bottom of the door (2).
Important: Ensure door handle is
correctly positioned
2. Mount top door bracket on the
top of the door (3) and screw
handle to bottom door bracket
(4).
10
818 42 32-00/0