Fitting The Side Panels - AEG Electrolux SANTO Z 7 19 90-5 i Benutzerinformation

Fitting the side panels

Fit the brackets onto the panels in the
•
positions shown in the diagram. The
dimension of 260 * mm is allowed for
fitting a 100 mm plinth below the
panel. For different plinth sizes,
increase the dimension of 260 * mm
accordingly.
• Rest the panels against the appliance.
• Fit the rear brackets, taking into
account the thickness of the panels
(maximum width of unit 900 mm).
• For a correct alignment make sure that
the distance between the appliance and
the cabinet is of 45 mm.
• Secure the panels at the front.
• Fix the squares (contained in the bag)
to the lower part of the door
(references already provided).
REAR
EDGE
RIGHT HAND
SIDE PANEL
15
INSIDE
820
15
280
FRONT
EDGE
17,5
1015
FACE
64
539
260*
41