AEG Electrolux SANTO Z 7 19 90-5 i Benutzerinformation Seite 45

Fitting the plinth
Alignment height of 820 mm
If using a 140 to 170 mm plinth,
•
make a cut-out as shown.
If using a plinth higher than 100 mm
•
but less than 140 mm, cut the height
compensation strip supplied with the
appliance to the required depth and
fit it between the plinth and the
ventilation griile, pressing it into
position below this grille.
If using a 100 mm plinth, fit the
•
complete height compensation strip.
820
870
170
220
140
190
140
190
30
100
45