Operating And Indicator Panel Fridge - AEG Electrolux SANTO Z 7 19 90-5 i Benutzerinformation

Operating and indicator panel Fridge

J. Mains pilot indicator (green)
K. Fridge button ON/OFF
L. Temperature setting button (for warmer temperatures)
M. Temperature display
N. Temperature setting button (for colder temperatures)
O. COOLMATIC function "on" indicator (yellow)
P. COOLTMATIC button
Temperature setting buttons
The temperature is adjusted using the „L" (+) and „N" (-) buttons. These
buttons are connected to the temperature display.
• The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the
DESIRED temperature (Temperature display flashes) by pressing one of the
two buttons, „L" (+) or „N" (-).
• Each time one of the two buttons is pressed again the DESIRED temperature
is adjusted by 1 °C. The DESIRED temperature must be reached within 24
hours.
If neither button is pressed, the temperature display automatically switches
back after a short period (approx. 5 sec.) to the display of the ACTUAL
temperature.
DESIRED temperature means:
The temperature that has been selected for inside the fridge. The DESIRED
temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current temperature inside the fridge.
The ACTUAL temperature is indicated with illuminated numbers.
Temperature display
The temperature display can indicate several pieces of information.
K L M
J
O
N
P
53