AEG Electrolux SANTO Z 7 19 90-5 i Benutzerinformation Seite 43

Refit the bracket on the
adjustment screws and screw the
nuts with washers without
tightening them down.
1
2
90°
3
Close the door and check that the
small door is positioned at the
required height, operating the
adjustment screws if necessary.
Use the same screws for vertical
alignment of the small doors.
If necessary, carry our horizontal
=
alignment by shifting the small
doors.
=
After aligning the doors, tighten
the nuts of the brackets and the
screws of the small bracket.
Fix the bracket located under the
door to the panel with the two
plastic washers contained in the
box of accessories.
Then refit the bracket cover.
43