Nibe PKM 05 Montageanleitung Seite 14

2
GB
Electrical installation FIGHTER 1140
Cabling from the PKM 05 is to be cut to the correct
length and connected to the FIGHTER 1140 as follows:
Mount the loose ends of the cables as follows (see wi-
ring diagram and figure):
- Connect the red wire to -X6:20.
- Connect the black wire to -X6:21.
- Connect the blue wire to -X6:22.
29 1
The green and white wires are not used, but are to be
insulated.
- Connect the yellow/green wire (earth wire) to
–X6:6
12
32 8
-X6
PKM 05
97
10
Note!
67
All electrical connections must be carried
out by an authorised electrician.
25
Electrical installation and wiring must be
carried out in accordance with the stipula-
3
tions in force.
Relay card
Shunt motor