Ypbpr; Setup.menu; Ypbpr.setup - Seg Denver Bedienungsanleitung

Denver 60cm (23,6") LCD-TV
H.Position
Press / button to select H Position, then press 
button to enter, press  /  button to adjust. Adjusts the
picture horizontally.
V.Position
Press / button to select V Position, then press  but-
ton to enter and press  /  button to adjust. Adjusts the
picture vertically.
Phase
Press / button to select Phase, then press  button
to enter and press  /  button to adjust. Adjusts the
clock phase to minimise picture jitter.
Notes:
1. Aspect ratio and blue screen at the PC source is not
available, and they will be shown in gray. Other menu
and description are the same as that for TV source, for
detailed information please refer to page 18-19.
2. PC source's channel menu is not available, and it will
be shown in gray.
3. Picture menu and description are the same as that
for TV source, for detailed information please refer to
page 11-12.
4. Sound menu and description are the same as that
for TV source, for detailed information please refer to
page 12.
5. Feature menu and description are the same as that
for TV source, for detailed information please refer to
page 16 .

YPBPR

Setup.Menu

Press MENU button to display the main menu. Press
/ button to select Setup in the main menu, then press
ENTER button or  button to enter.
1. Press / button to select the option that you want to
adjust in the Setup menu, then press ENTER button or
 button to enter.
2. Press  /  button to adjust or press / button to
select.
3. After finishing your adjustment, Press MENU button to
save and return back to the previous menu, and press
EXIT button to exit the entire menu.

YPBPR.Setup

Press / button to select YPBPR Setup, then press
ENTER button or  button to enter.
H.Position
Press / button to select H Position, then press ENTER
button or  button to enter and press  /  button to
adjust. Adjusts the picture horizontally.
V.Position
Press / button to select V Position, then press ENTER
button or  button to enter and press  /  button to
adjust. Adjusts the picture vertically.
Position.Reset
Press / button to select Position Reset, then press
ENTER button or  button to reset H position and V posi-
tion.
23