Seg Denver Bedienungsanleitung Seite 50

Return back to the previous menu if select "No" and
press ENTER button.
If select "Yes" and press ENTER button, the resetting
menu will appear a few second, then the first time instal-
lation menu will appear.
Hotel.Lock
Press/ button to select Hotel Lock, then press ENTER
button or  button to enter, the password menu will ap-
pear.
At the cursor, input password to enter, default password
is"0000"(When the system lock is "on").
Default.Volume
Press / button to select Default Volume, the press
 /  button to select adjust.
Tuner.Lock
Press / button to select Tuner Lock, press the  / 
button to select On or Off.
Hotel.Lock
Press / button to select Hotel Lock, then press  / 
button to select On or Off
Source.Lock
Press / button to select Source Lock, then press EN-
TER button or  button to enter the source lock menu.
Set input channel locking whether or not.
Default.Source
Press / button to select Default Source, then  / 
button to select Source.
Default.Prog
Press / button to select Default Prog, then /  but-
ton to select adjust.

Denver 60cm (23,6") LCD-TV
Max.Volume
Press / button to select Max Volume, then  /  but-
ton to select adjust.
Clear.Lock
Press / button to select Clear Lock, then press EN-
TER button or  button to Clear Lock.
Firmware.Upgrade
Press / button to select Firm Software Upgrade, then
press ENTER button or  button to enter the software
upgrade menu.
Erase the original program, then the menu will appear as
follows:
Note: Do not cut off the power during the upgrade. Other-
wise the upgrade won't occur.
Note:
TV/DTV/Media/AV/PC/YPRPB/SCART/HDMI source's
channel menu is not available and they will be shown in
gray.