Menu Operations; Picture.menu - Seg Denver Bedienungsanleitung

Menu Operations

Press INPUT button to display the input source list;
Press / button to select the input source you want to
watch ;
Press ENTER button or  button to enter the input
source; Press MENU button to display the MAIN OSD
MENU; Press / button to select the MENU you want;
Press ENTER button or  button to enter the sub menu;
Press / button to select the option and then press
ENTER button or  button to enter the submenu. Press
 /  button to adjust the value or press / button to
select in the sub menu ;
You can press MENU button to save and return back to
the previous menu, and press EXIT button to exit the
entire menu.
Press display button on the remote control to display
program information.
1. Current Channel Number.
2. The colour system of current channel, could be
changed on Manual Search menu.
3. Current Channel Name.
4. The sound system of current channel, could be
changed on Manual Search menu.
5. The NICAM mode of current program.
If the icon of NICAM mode is red, it means the
current program supplies multiple NICAM signals,
and you can change it by pressing AUDIO button.
Four kinds of NICAM modes and relative icons:
0
Denver 60cm (23,6") LCD-TV

Picture.Menu

Press MENU button to display the main menu.
Press / button to select Picture in the main menu
then press ENTER button or  button to enter.
1. Press / button to select the option that you want to
adjust in the Picture menu, then press ENTER button
or  button to enter.
2. Press  /  button to adjust or press / button to
select.
3. After finishing your adjustment. Press MENU button to
save and return back to the previous menu, and press
EXIT button to exit the entire menu.
Picture.Mode
Press / button to select Picture Mode, then press EN-
TER button or  button to enter and press / button to
select. (Available Picture Mode: Personal, Sport, Movie,
Mild, Game, Standard].
You can change the value of brightness, contrast, sharp-
ness, colour, when the picture is in Personal mode, If you
change the value of these selections, the Picture Mode
will be "Personal" automatically.
TIPS: You can press PMODE button on the remote control
again and again to change the Picture Mode directly.
Brightness
Press / button to select Brightness, then press EN-
TER button or  button to enter and press  /  button
to adjust.
Contrast
Press / button to select Contrast, then press ENTER
button or  button to enter and press  /  button to
adjust.