General Information; Software Licence Agreement - WIKA CPH7000 Betriebsanleitung

1. General information

1. General information
The process calibrator model CPH7000 described in the operating instructions has been designed and manufactured using
■
state-of-the-art technology. All components are subject to stringent quality and environmental criteria during production. Our
EN
management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instrument. Working safely requires that all
■
safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety regulations for the instrument's range of use.
■
The operating instructions are part of the product and must be kept in the immediate vicinity of the instrument and
■
readily accessible to skilled personnel at any time. Pass the operating instructions on to the next operator or owner of the
instrument.
Skilled personnel must have carefully read and understood the operating instructions prior to beginning any work.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with international standards.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
Abbreviations, definitions
"XXX" Menu XXX will be selected
[XXX] Press button XXX
1.1

Software licence agreement

This product contains intellectual property, i.e. software programs which are licensed to be used by the end user/client
(hereinafter referred to as "end user").
The license does not include the sale of the intellectual property.
The end user shall neither copy nor disassemble or recompile the software program.
The software program will be provided to the end user "as it is" without any guarantees, either expressly or
implicitly, including but not limited to warranties of marketability and fitness for purpose. The end user has to bear
the entire quality and performance risk related to the software program.
Both WIKA and its suppliers are not liable for any damage to the end user (including but not limited to general,
special, consequential or incidental damage, including loss of business profits, business interruption, loss of
business information, and the like) resulting from or relating to the delivery, use or performance of the software
program.
6
www.wika.de / www.wika.com
CT 15.51
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.de
WIKA operating instructions portable process calibrator, model CPH7000