Before First Use - SOLIS 791 Bedienungsanleitung

BEFOR E F IRS T U S E
▲
• To burn production residues on the grill plate and to burn in the protective coa-
ting on the heating element, all removable appliance parts have to be cleaned
and the assembled appliance has to heated up before first use.
1. Remove the grill plate from the appliance base. Clean the grill plate, the square
pans and the round mini-woks as well as the plastic spatulas in hot dish water
with a soft towel or sponge. After that, rinse all parts in clear water and dry them.
2. Wipe the stainless steel plating and the cold zone tray clean with a moist, soft
towel.
3. Place the appliance on a dry, heat and moisture resistant worktop.
4. Place the dry grill plate back on the base and plug the connection adapter of the
power cord into the appliance jack and the power plug into a suitable power
outlet. The pans should not be in the appliance.
5. Switch the appliance on with the red main switch (red function light glowing) and
set the temperature control to the highest position (all the way to the right). Addi-
tionally, switch on the lower heating element by setting the black switch to „I".
6. Let the appliance heat up for 10 minutes, after that return the temperature con-
trol to its lowest setting (all the way to the left) and set both switches back to
„0" to switch the appliance off. Pull the plug and let the appliance cool down.
7. Wipe both sides of the cooled down grill plate with a slightly wet towel.
8. Your appliance is now ready for use.
58
ST AR TI NG UP
▲
U S ING TH E AP PL I ANC E ONL Y WI T H T HE U PP E R HE ATI NG
■
E L EM ENT (HE ATI NG C OI L) A S A GR IL L OR R AC L ET TE S ET
1. Place the clean appliance on a dry, stable and heat and moisture resistant table.
2. Choose which side of the grill plate suits you best and place it on the appliance
base. Rub the grill plate with a paper towel soaked in cooking oil.
3. Plug the connection adapter of the power cord into the appliance jack and the
power plug into a suitable power outlet.
4. Switch the red main switch to „I", the red function light glows.
5. Set the temperature control to the maximum power and let the appliance heat
up for approx. 15 minutes. In this setting, the light surrounding lights up red.
6. In case you want less than maximum power, turn the temperature control to the
desired position.
You can now freely place your grillables on the grill plate. The grooved area is
especially suitable for meat, the smooth area is especially suitable for fish, seafood
or vegetables.
The raclette cheese and the mini pizza can be put in the square pans and placed on
the stainless steel plating. This way, everything will be deliciously baked.
Please use the included plastic spatulas to take the foods out of the pans.
Please use a heat resistant plastic kitchen spatula to remove the grillables from the
grill plate. Never use metal kitchen tools, these might damage the non-stick coat-
ing. For the same reason, do not cut directly on the grill plate or in the pans and
never use barbecue tools. Avoid prolonged contact of the plastic tools with the hot
grill plate / the hot pans.
59