Environment Concerns; Packaging Material; Warranty - AEG Electrolux HK854220XB Benutzerinformation

28

Environment concerns

Problem
comes on
There is no signal when you
touch panel keys
If you tried the above solutions and cannot repair the problem, speak to your dealer or the
Customer Care Department. Give the data from the rating plate, three-digit-letter code for
the glass ceramic (it is in the corner of the cooking surface) and an error message that
comes on.
If you operated the appliance incorrectly, the servicing by a customer service technician or
dealer will not be free of charge, even during the warranty period. The instructions about
the customer service and conditions of guarantee are in the guarantee booklet.
ENVIRONMENT CONCERNS
The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.

Packaging material

The packaging materials are friendly to the environment and can be recycled. The plastic
components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as
household waste at the waste disposal facilities in your municipality.

WARRANTY

FOR SALES IN AUSTRALIA AND NEW ZEALAND
This document sets out the terms and conditions of product warranties for Electro-
lux branded appliances. It is an important document. Please keep it with your proof
of purchase documents in a safe place for future reference should you require serv-
ice for your Electrolux appliance. General Terms and Conditions
There is an error in the appliance, because a cookware boils dry or
you use not correct cookware. Overheating protection for the
cooking zone operates. The automatic switch-off operates.
Switch off the appliance. Remove the hot cookware. After ap-
proximately 30 seconds switch on the cooking zone again.
should disappear, residual heat indicator can stay. Cool down the
cookware and check it with the section Cookware for the induc-
tion cooking zone.
The signals are off.
Switch on the signals.
on the product or on its packaging indicates that this product may not be
Possible cause and remedy