Installation Instructions; Settings; Channel Groups - Vestamatic VestaFunk MS12–500 Montage- Und Bedienungsanleitung

83201411 H1.qxd 08.08.01 20:23 Seite 35

Installation instructions

- 35 -
G

Settings

In order to customize the decentralized control Vestamatic VestaFunk
MS12 – 500 / MS14 – 500 to your requirements, you can choose from a
range of different setting options. The settings are carried out via the
DIP switches on the rear panel of the device. Below all preset default
settings are marked in bold print.
The switches have the following functions:
Channel group
If you use a 12-channel radio transmitter, the channel group in which
the Vestamatic VestaFunk MS12 – 500 / MS14 – 500 operates, can be set
by DIP switches 1 and 2.
If you use a 4-channel-radio transmitter, you must definitely select
channel group 0.
Switches
1 2 Setting the channel groups
OFF OFF Group 0 (channel 1, 2, 3, 4)
OFF ON Group 1 (channel 5, 6, 7, 8)
ON OFF Group 2 (channel 9, 10, 11, 12)
ON ON No radio control
- 36 -
G