Unilateral Modification And Spare Parts Manufacturing; Unproved Usage; Scope Of Delivery - Flow CUT BOX Betriebsanleitung

Unilateral modification and spare parts manufacturing | Unproved usage | Scope of delivery

3.5 Unilateral modification and spare parts manufacturing

Modifications or changes to the unit/installation should only be carried out after
consultations with the manufacturer. Original spare parts and accessories autho-
rised by the manufacturer are essential for compliance with safety requirements.
The use of other parts can invalidate any claims for warranty or compensation.

3.6 Unproved usage

The operating safety of the unit is only guaranteed provided that the unit is used
in accordance with these operation instructions. The limit values given in the data
sheet should under no circumstance be exceeded. These installation and operation
instructions do not supersede or exclude the following of generally valid regulations
and standards.

4. Scope of delivery

Synthetic tank, pre-assembled and wired, ready for installation with rubber feet,
tank mounting supports/securing brackets, inlet seals, non-return valve for external
attachment, drain tube with cap, overflow protection and alarm, vent with integrated
odour filter, built-in motor unit with shredding system and moisture sensor level
control.
24