Renkforce 1423783 Bedienungsanleitung Seite 43

Keeping the respective button down for some time will adjust them quickly.
This also applies to setting of month, date, hours, minutes, time zone and lan-
guage for the weekday. If you do not push any button for about 30 seconds, the
radio alarm saves all input and leaves the setting mode automatically.
• Briefly push the button "TIME SET" (B3); the setting of the date display will flash. Use
the arrow buttons B6 (down) and B7 (up) to set whether the day or the month of the
date is to be displayed first.
• Briefly push the button "TIME SET" (B3) to switch to setting of the month. Set it as
well with the arrow buttons B6 (down) or B7 (up).
• Briefly push the button "TIME SET" (B3) again; the date flashes. Set it as well with the
arrow buttons B6 (down) or B7 (up).
• Briefly push the button "TIME SET" (B3); the display for 12h/24h mode will flash. Use
the arrow buttons B6 (down) and B7 (up) to set whether the time is to be displayed in
12 or 24 hr mode.
• Briefly push the button "TIME SET" (B3); the display for the hours. Set it with the
arrow buttons B6 (down) or B7 (up).
• Briefly push the button "TIME SET" (B3) to switch to setting of the minutes. Set it as
well with the arrow buttons B6 (down) or B7 (up).
• Briefly push the button "TIME SET" (B3); the display for the seconds. You can reset
these to zero with one of the two arrow buttons B6 or B7. Set one minute more first
when setting the minutes. When the current time has reached this minute, reset the
seconds to zero.
• Push the button "TIME SET" (B3), to adjust the time zone. You can adjust the time by
-23 hours to +23 hours with this. Use the arrow buttons B6 (down) or B7 (up) again for
this.
• Push the "TIME /SET" button (B3) briefly; the language for displaying the weekday
will flash at the upper left of the display next to the temperature display. Use the
arrow buttons B6 (down) or B7 (up) to set them ("EN" = English, "FR" = French, "DE"
= German, "ES" = Spanish, "IT" = Italian).
• To save all settings and to leave the setting mode, push the button "TIME SET" (B3).
Alternatively, you can just wait for 30 seconds without pushing any button, the radio
projection alarm clock saves all input automatically and leaves the setting mode.
43