Expolite TOUR-FLASH PRO RGBW Bedienungsanleitung Seite 34

34
ACTIVATE THE PASSWORD
3.9
Enter the KEY mode to select whether the access password is on
or off. When the fixture is set as PASS ON, after 30 seconds or turn
on the fixture next time, the fixture will need an access password
to enter the display menu control.
PASSWORD: UP + DOWN + UP + DOWN + ENTER
MENU
KEY
3.10 BALANCE PARAMETERS AND CORRECTION
Press MENU button to enter the password confirmation, to enter
the correct password < UP + DOWN + UP + DOWN >
Enter the CALIB.C to select white color of different color tempera-
ture. There are 12 pre-programmed White colors can be edited by
using RED, GREEN, BLUE & WHITE.
Enter the RGBTOW to adjust the RGB parameter to make different
whites. When the new setting is activated, the DMX controller
choose RGB = 255,255,255 the white color will be made by the
actual RGB values on the RGBW.
MENU
CALIB. C.
INFO MENÜ
3.11
Enter the INFO menu to can check VERSION, RDM UID, RDM LA-
BEL and MAC Adress.
MENU
VERSION
RDM
MAC
ON
OFF
***
WHITE 2700 K
3000 K
10000 K
CALIB. R.
***
RGB TO W
RED
GREEN
BLUE
UID 0X388AXXX
LABEL TOURFLASH
RED R. (0-255)
GREEN G. (0-255)
BLUE B. (0-255)
WHITE W. (0-255)
RED R. (0-255)
GREEN G. (0-255)
BLUE B. (0-255)
WHITE W. (0-255)
RED R. (0-255)
GREEN G. (0-255)
BLUE B. (0-255)
WHITE W. (0-255)
RED R. (0-255)
R. (0-255)
G. (0-255)
B. (0-255)