Power Connections - Expolite Tour-Flash Pro Rgbw Bedienungsanleitung

2.0 INSTALLATION
2.1
MOUNTING
The fixture can be mounted in
any position using the support-
ing bracket. There are several
options to mount the quicklock
braket or use srewing holes.
NOTE!
The fixture has to be safed against accidential falling.
Use safety cable that is certified for this fixtures weight!
2.2

POWER CONNECTIONS

220~240V: 2 units may be connected in series
110~120V: 1 units may be connected in series
NOTE!
If the signal cable is over 60 m between the DMX512 controller
and fixture or beween two fixtures, then a DMX signal amplifier is
needed as well.
29