Special Settings - Expolite Tour-Flash Pro Rgbw Bedienungsanleitung

PERSONALITY
3.7
In PERSONALITY menu the DMX mode is choosen.
MENU
PERSONALITY

SPECIAL SETTINGS

3.8
UPLOAD choose LOAD PARA to upload data to connected Slave
fixtures.
RESET will reset the fixture.
COLOR to select the color calibration functions. When RGBTOW is
selected, the color is displayed as calibrated inService -- RGBtoW.
When COLOR is set OFF the RGBvalues are not adjusted and the
output is most powerful. When UC is selected, the RGB output
are adjusted to a standard preset universal color which balances
fixtures from different generations.
FANS SLOW/NORM/FAST/AUTO selects required fan speed.
DIMMER for selecting DIM1/DIM2/DIM3/DIM4/OFF special dim-
ming curves.
DMX ERROR selects to Save or Blackout in case of DMX error.
PWM will set the PWM-frequency of the LED´s.
POWER CCT is the color temperature under full power. 3200 K/
4200 K/5600 K/10000 K or NORMAL can be choosen.
NET SWTCH enables the internal ARTNET mode.
IP MODE can choose DEFAULT IP or CUSTOM IP.
CUSTOM IP SET allows to enter custom defined IP-Adress.
UNIVERSE selection will set the fixtures ARTNET universe (0-255
PASSWORD: UP+DOWN+UP+DOWN+ENTER
MENU
SETTING
HSIC
SSP
TR16
PIXEL.1
PIXEL.2
HALOGEN
PWM
***
POWER CCT
NETWORK
1200 HZ
2000 HZ
2400 HZ
6000 HZ
25000 HZ
3200 HZ
4200 HZ
5600 HZ
10000 HZ
NORMAL
NET SWITCH OFF
ON
IP MODE DEFAULT IP
CUSTOM IP
CUSTOM IP SET XX.XX.XX.XX
UNIVERS XXX
33