Troubleshooting - JVC RM-P210 Bedienungsanleitung

TROUBLESHOOTING

Symptom
Colours in the monitor screen
are abnormal. (During
genlocking)
Video
Synchronization is not
troubles
possible.
Pressing the corresponding
button cannot start the
operation.
<EXT> is displayed on the LCD.
The LCD display keeps on
displaying "NOW INITIALIZING
JUST A MOMENT" or "PLEASE
CHECK THE CAMERA".
LCD display shows "---".
Control
White-balance adjustment
troubles
cannot be started.
The white balance adjustment
will not complete.
The tally lamp does not light.
Intercom is not possible.
Check Points
• Is the SC phase adjusted properly?
•
Are the BB or VBS signals applied to the GENLOCK INPUT
connectors?
•
Is the VCR playback signal supplied directly without passing
through a TBC?
•
Functions that are not available on the camera cannot be
controlled.
Check the camera functions again.
•
Are cables connected properly?
•
Are the power switches of the RM-P210 and camera set to ON?
•
Is the MODE (RM/VTR) switch on the camera adapter set to
"RM"?
•
The connected camera does not have the assigned function.
Check the camera functions again and assign the proper
functions to the F1 to F4 keys.
•
Is the W.BAL switch set to A or B?
•
Is FAS or FAW ON (which is indicated by the lighting of the AUTO
lamp)?
•
Are the color temperature filters and lighting conditions appropriate?
•
Does the object have colors?
•
Is the tally system of the RM-P210 compatible with that of the
camera system?
The RM-P210 has been set to the voltage supply at the factory. If
it is required to use the TALLY input in the contact supply mode,
the setting of the internal circuitry should be changed ; consult the
nearest JVC-authorized service agent.
•
Is the headset impedance suitable? (Earphone: 50 W to 300 W /
1 kHz. Microphone: Carbon).
GENERAL
Page
P. 12
P. 12
—
P. 7
P. 24
P. 17
P. 17
P. 13
P. 13
E-29