System Reset Menu - JVC RM-P210 Bedienungsanleitung

MENU OPERATION

SYSTEM RESET MENU

This menu resets the values set by the user to the initial values.
FULL AUTO F1
SHUTTER
STR 1/1000
CMP +9dB
BARS
F2
GAIN
M
LCD display
1.
6: LCD MODE
7: SYSTEM RESET
2.
7A: SYSTEM RESET
3.
7A: SYSTEM RESET
4.
7A: SYSTEM RESET
5.
STR
CMP
Initial values
● The values you've set in the menu items will be reset to the initial values shown on pages 21 to 27.
● Other status settings are reset as shown below.
Status Setting
IRIS button
W.BAL switch
PAINT button
WHITE WHITE PAINT
MANUAL PAINT
E-26
F3 MENU/SHUTTER GAIN
STEP
HIGH
ALC
SHUTTER VARIABLE MID
LUX
PUSH-ON PUSH-ON
F4 MENU
LOW
DOWN UP DOWN UP
Control knob
MENU button
CANCEL
CANCEL
OK
OFF ALC
0 dB LUX
Initial Values
MANUAL
Switch position
OFF
Bch
A
Central value of the control
Rch
Bch
B
Central value of the control
Rch
Bch
Central value of the control
Rch
P
R
1.
Press and hold the MENU button (approx. 1 second) until
the LCD display shows the menu display. Then turn the con-
trol knob to move the cursor ( ) to "7: SYSTEM RESET".
2.
Press the control knob to display "7A: SYSTEM RESET".
3.
Press the control knob to move the cursor ( ) to "CAN-
CEL". If you do not want to reset the values you have set,
press the control knob now.
4.
If you want to reset the values, turn the control knob to
move the cursor ( ) to "OK".
5.
Press the control knob to reset the values you have set to
the initial values and return to the normal display.
Status Setting
STEP switch
GAIN
V.GAIN LEVEL
SHUTTER
SHUTTER
V.SCAN LEVEL
FULL AUTO
BARS
F1 to F4 buttons
LOLUX
ALC+EEI
Initial Values
Switch position
0.1 dB
OFF
Approx.1/120
OFF
OFF
Initial value, OFF
OFF
OFF