Menu Setup Method - JVC RM-P210 Bedienungsanleitung

MENU SETUP METHOD

Each menu is displayed on the LCD display and can be set up using the MENU button and the control knob.
The values set in the "4: PROCESS" and "5: OPERATION" menus can be saved in files A and B.
<Example of changing the camera cable length from 20 m to 100 m>
FULL AUTO F1
SHUTTER
STR OFF
CMP +0 dB
BARS F2
GAIN
M
LCD display
Cursor
1.
1: GEN LOCK
2: CABLE
2.
1: GENLOCK
2: CABLE
Item
3.
2A: LENGTH
4.
2A: LENGTH
5.
2A: LENGTH
6.
2A: LENGTH
7.
2Z: BACK
8.
1: GENLOCK
2: CABLE
9.
7: SYSTEM RESET
8: EXIT
F3 MENU/SHUTTER GAIN
STEP
HIGH
ALC
SHUTTER VARIABLE MID
LUX
PUSH-ON PUSH-ON
F4 MENU
LOW
DOWN UP DOWN UP
Control knob
MENU button
Setting
20M
20M
100M
100M
1.
Press and hold the MENU button for about 1 second until
P
the LCD display shows the menu display. The cursor ( )
R
indicates that the item being pointed to can be varied.
2.
Turn the control knob to move the cursor ( ) to the de-
sired item.
3.
Press the control knob to display the name and current
setting of the next item.
4.
Press the control knob to move the cursor ( ) to the posi-
tion of the currently set value.
5.
Turn the control knob to adjust the setting.
6.
Press the control knob to move the cursor ( ) back to the
item.
7.
Turn the control knob to move the cursor ( ) to BACK.
8.
Press the control knob to return to the previous menu.
9.
After completing the setup, move the cursor ( ) to "8: EXIT"
and press the control knob to return to the normal display.
MENU OPERATION
E-19