Process Menu - JVC RM-P210 Bedienungsanleitung

MENU OPERATION

PROCESS MENU

This menu sets the functions built into the camera.
(Some of the following items cannot be set if a local remote control unit is connected to the camera or depending on the connected
camera model.)
No. Item
4A DETAIL
4B DETAIL LEVEL
4C DETAIL V/H
4D DETAIL FRQ
4E SKIN DETAIL
4F AUTO KNEE
4G KNEE POINT
4H COLOR MATRIX
E-22
Function, Operation
ON/OFF setting of the detail enhancement function.
OFF : Detail enhancement is deactivated.
ON : Detail enhancement is activated.
Adjusts the detail enhancement level.
Increasing the level : Sharpens details.
Decreasing the level : Softens details.
Selects whether the detail enhancement is applied more strongly
in a horizontal or vertical direction.
Increasing the level : Applies detail enhancement more
strongly in a H direction.
Decreasing the level : Applies low detail enhancement in the H
direction.
NOTE
This item cannot vary the detail enhancement in the V direction.
Sets the detail enhancement frequency according to the object.
LOW : Low frequency to be used when shooting a coarsely
patterned object.
MIDDLE : Standard frequency.
HIGH : High frequency to be used when shooting a small or
finely patterned object.
AUTO : Automatic adjustment of the detail enhancement fre-
quency according to the object.
ON/OFF setting of the skin tone detail function, which displays
natural, wet skin colours by reducing detail enhancement on
the skin areas.
OFF : Skin tone detail function is deactivated.
ON : Skin tone detail function is activated.
ON/OFF setting whether the auto knee function is activated accord-
ing to the knee point setting to be made below.
OFF : Auto knee function is deactivated.
ON : Auto knee function is activated.
Sets the knee point level at which the auto knee function is de-
activated.
Increasing the level : The knee function is activated at a
higher video level.
Decreasing the level : The knee function is activated at a lower
video level.
NOTE
The actual variation in the knee point occurs step by step because
this is set as a result of the knee point setting of the camera.
ON/OFF setting of whether the color matrix function.
OFF : The color matrix function is deactivated.
ON : The color matrix function improves the colour reproducibil-
ity. Note that noise increases with this setting.
Available Settings Initial Setting
OFF ON
ON
10 to NORMAL
NORMAL to
-10
(21 steps)
10 to NORMAL
NORMAL to
-10
(21 steps)
LOW MIDDLE
MIDDLE
HIGH
AUTO
OFF OFF
ON
OFF ON
ON
10 to NORMAL
NORMAL to
-10
OFF ON
ON