AEG DD8692-M Benutzerinformation Seite 43

Instructions for use
Preparations for the outlet duct
Before fitting the hood the fixing holes must be drilled and a hole must be made through
the external wall for installation of the wall housing (air outlet/inlet).
Preparations for the wall housing/Hole through the ceiling
If cooking vapours are to be discharged into the open-air through the external wall, a
telescopic wall housing must be used (available as a special accessory).
For discharge System Ø 120 mm /125 mm:
MKZ 125 ( with air outlet/inlet) Serial no. 610 899 004
43