Kenwood NX-5200 Benutzerhandbuch Seite 21

m 4-way D-pad
Press to activate its programmable function.
[ ] : The default setting is [None].
[ ] : The default setting is [None].
[ ] : The default setting is [Zone Up].
[ ] : The default setting is [Zone Down].
n [
] key
Press to activate its programmable function. The default
key setting is [None].
o [
] key
Press to activate its programmable function. The default
key setting is [Clear].
p Keypad (Full key model only)
Press the keys on the keypad to send DTMF tones. The
keypad keys can also be programmed with secondary
functions if a programmable function keys is programmed
as Function.
q A/ B/ C key (Standard key model only)
Press to activate its programmable function.
r Universal connector
Connect the (optional) speaker/ microphone here.
Otherwise, keep the supplied cap in place.
For details on programming functions to the keys on your
transceiver, please contact your dealer or refer to the
instruction manual available from the following URL.
http://manual2.jvckenwood.com/en_contents/search/
19