Crossover Settings - Kenwood KMM-BT203 Bedienungsanleitung

AUDIO SETTINGS

Crossover settings

Below are the available setting items for 2-way crossover
and 3-way crossover.
SPEAKER SIZE
Selects according to the connected speaker size for
optimum performance.
• The frequency and slope settings are automatically set
for the crossover of the selected speaker.
• When 2-way crossover is selected, if [NONE] is selected
for [TWEETER] of [FRONT], [REAR] and [SUBWOOFER] for
[SPEAKER SIZE], the [X ' OVER] setting of the speaker is not
available.
• When 3-way crossover is selected, if [NONE] is selected
for [WOOFER] of [SPEAKER SIZE], the [X'OVER] setting of
[WOOFER] is not available.
X ' OVER
• [FRQ]/[F - HPF FRQ]/[R - HPF FRQ]/[SW LPF FRQ]/[HPF FRQ]/
[LPF FRQ]: Adjusts the crossover frequency for the
selected speakers (high pass filter or low pass filter).
If [THROUGH] is selected, all signals are sent to the
selected speakers.
• [F - HPF SLOPE]/[R - HPF SLOPE]/[SW LPF SLOPE]/[HPF SLOPE]/
[LPF SLOPE]/[SLOPE]: Adjusts the crossover slope.
Selectable only if a setting other than [THROUGH] is
selected for the crossover frequency.
• [SW LPF PHASE]/[PHASE]: Selects the phase of the speaker
output to be in line with the other speaker output.
• [GAIN LEFT]/[GAIN RIGHT]/[F - HPF GAIN]/[R - HPF GAIN]/
[SW LPF GAIN]/[GAIN]: Adjusts the output volume of the
selected speaker.
2-way crossover setting items
SPEAKER SIZE
FRONT SIZE 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9/
7×10
TWEETER SMALL/MIDDLE/LARGE/NONE (not connected)
REAR 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9/7×10/NONE
(not connected)
SUBWOOFER * 1
16CM/20CM/25CM/30CM/38CM OVER/NONE (not connected)
X ' OVER
TWEETER FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/10KHZ/12.5KHZ
GAIN LEFT –8 to 0
GAIN RIGHT –8 to 0
FRONT HPF F - HPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/150HZ/
180HZ/220HZ/250HZ/THROUGH
F - HPF SLOPE –6DB/–12DB/–18DB/–24DB
F - HPF GAIN –8 to 0
REAR HPF R - HPF FRQ
R - HPF SLOPE (Refer FRONT HPF settings above.)
R - HPF GAIN
SUBWOOFER SW LPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/150HZ/
LPF * 1
180HZ/220HZ/250HZ/THROUGH
SW LPF SLOPE –6DB/–12DB/–18DB/–24DB
SW LPF PHASE REVERSE (180°)/NORMAL (0°)
SW LPF GAIN –8 to 0
* 1
Selectable only when [SWITCH PREOUT] is set to [SUB-W] ( 4) and [SUBWOOFER SET] is set to [ON].
( 16)
ENGLISH 17