Kenwood KMM-BT203 Bedienungsanleitung Seite 18

BLUETOOTH®
RECONNECT ON: The unit automatically reconnect when the last connected
Bluetooth device is within range. ; OFF: Cancels.
AUTO PAIRING ON: The unit automatically pair supported Bluetooth device
(iPhone/iPod touch/Android device) when it is connected
through USB input terminal. Depending on the operating
system of the connected device, this function may not work. ;
OFF: Cancels.
INITIALIZE YES: Initializes all the Bluetooth settings (including stored
pairing, phonebook, and etc.). ; NO: Cancels.
Bluetooth test mode
You can check the connectivity of the supported profile between
the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold .
"PLEASE PAIR YOUR PHONE PIN 0000" appears.
2
Search and select this unit model name (KMM-BT20*) on
the Bluetooth device.
3 Operate the Bluetooth device to confirm pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP)
compatibility
PB DL: Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold
14 ENGLISH
BLUETOOTH — Audio
While in BT AUDIO
source, you can connect
to five Bluetooth audio
devices and switch
between these five
devices.
Audio player via Bluetooth
1
Press
2
Operate the Bluetooth audio player to start playback.
To
Playback/pause
Select group or folder
Reverse/Forward skip
Reverse/Fast-forward
Repeat play
Random play
Select a file from a folder/list
Switch between connected
Bluetooth audio devices
to turn off the unit.
* Pressing the "Play" key on the connected device itself also causes switching of sound output from the
device.
Operations and display indications may differ according to their availability on the
connected device.
repeatedly to select BT AUDIO.
On the faceplate
Press .
Press J / K.
Press S / T.
Press and hold S / T.
Press repeatedly.
ALL REPEAT, FILE REPEAT, REPEAT OFF
Press and hold
• Press to select RANDOM OFF.
Refer to "Select a file from a folder/list" on
page 8.
Press 5. *
to select ALL RANDOM.