Aux - Kenwood KMM-BT203 Bedienungsanleitung

USB/iPod/ANDROID
Settings to use KENWOOD Remote application
KENWOOD Remote application is designed to control the KENWOOD car
receiver's operations from the iPhone/iPod (via USB input terminal).
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting. For more information, visit
<www.kenwood.com/cs/ce/>.
You can make the settings in the same way as connection via Bluetooth.
( 15)
Other settings
1
Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
USB
MUSIC DRIVE DRIVE CHANGE: The next drive ([DRIVE 1] to [DRIVE 4]) is selected
automatically and playback starts.
1 3
Repeat steps to to select the following drives.
SKIP SEARCH 0.5%/1%/5%/10%: While listening to iPod USB or ANDROID source, selects
the skip search ratio over the total files.

AUX

Preparation:
Select [ON] for [BUILT-IN AUX] for [SOURCE SELECT]. ( 4)
Start listening
1 Connect a portable audio player (commercially available).
Auxiliary input jack
3.5 mm stereo mini plug with "L" shaped connector
(commercially available)
2
Press
3
Turn on the portable audio player and start playback.
.
Set the AUX name
Default: XX
While listening to a portable audio player connected to the unit...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [SYSTEM], then press the knob.
3
Turn the volume knob to select [AUX NAME SET], then press the knob.
4
Turn the volume knob to select an item, then press the knob.
AUX (default)/DVD/PORTABLE/GAME/VIDEO/TV
5
Press and hold
To return to the previous setting item, press
Portable audio
player
repeatedly to select AUX.
to exit.
.
ENGLISH 9