Kenwood KMM-BT203 Bedienungsanleitung Seite 16

BLUETOOTH®
MIC GAIN –10 to +10 (–4): The sensitivity of the microphone increases as the
number increased.
NR LEVEL –5 to +5 (0): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL –5 to +5 (0): Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Answer incoming call automatically
1 Press to enter Bluetooth mode.
2
Turn the volume knob to select [SETTINGS], then press the knob.
3
Turn the volume knob to select [AUTO ANSWER], then press the knob.
4
Turn the volume knob to select an item, then press the knob.
1 to 30 (in seconds)/ OFF (default)
5 Press and hold to exit.
To return to the previous setting item, press
Make a call
You can make a call from the call history, phonebook, or dialing the
number. Call by voice is also possible if your mobile phone has the
feature.
1 Press to enter Bluetooth mode.
"(First device name)" appears.
• If two Bluetooth phones are connected, press
another phone.
"(Second device name)" appears.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press
12 ENGLISH
Default: XX
CALL HISTORY
PHONE BOOK
.
again to switch to NUMBER DIAL
.
(Applicable only if the phone supports PBAP.)
1 Press the volume knob to select a name or a phone number.
• "I" indicates call received, "O" indicates call made, "M" indicates call
missed.
• Press DISP to change the display category (NUMBER or NAME).
• "NO DATA" appears if there is no recorded call history.
2 Press the volume knob to call.
(Applicable only if the phone supports PBAP.)
1 Turn the volume knob quickly to enter alphabet search mode (if the
phonebook contains many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1*), press J / K.
• To select the desired first letter, turn the volume knob or press
S / T, then press the knob.
Select "1" to search with numbers and select "*" to search with
symbols.
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob
to call.
• The phonebook of the connected phone is automatically transferred to
the unit when pairing.
• Contacts are categorized as: HM (home), OF (office), MO (mobile), OT
(other), GE (general)
• This unit can display only non-accent letters. (Accent letters such as "Ú"
is shown as "U".)
1 Turn the volume knob to select a number (0 to 9) or character
( , #, +).
2 Press S / T to move the entry position.
1 2
Repeat steps and until you finish entering the phone number.
3 Press the volume knob to call.