Receive A Call - Kenwood KDC-320UI Bedlenungsanleitung

BLUETOOTH®
(for
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain
registered in the unit even if you reset the unit. To delete the
paired device, 15, [DEVICE DELETE].
• A maximum of two Bluetooth phones and one Bluetooth audio
device can be connected at any time.
However, while in BT AUDIO source, you can connect to five
Bluetooth audio devices and switch between these five devices.
( 16)
• Some Bluetooth devices may not automatically connect to the
unit after pairing. Connect the device to the unit manually.
• Refer to the instruction manual of the Bluetooth device for
more information.
Auto Pairing
When you connect iPhone/iPod touch/Android device to the USB
input terminal, pairing request (via Bluetooth) is automatically
activated.
Press the volume knob to pair once you have confirmed the
device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
– [AUTO PAIRING] is set to [ON]. ( 15)
– KENWOOD MUSIC PLAY application is installed on the Android
device ( 8) and [BROWSE MODE] is selected. ( 9)
12
ENGLISH
)
BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time.
( 13)
During a call:
• If you turn off the unit or detach the faceplate, the Bluetooth connection is
disconnected.
The following operations may differ or not available depending on the connected
phone.
To
First incoming call...
Answer a call
Reject a call
End a call
While talking on the first incoming call...
Answer another incoming call
and hold the current call
Reject another incoming call
On the faceplate
Press or the volume knob or one of
the number buttons (1 to 6).
Press .
Press .
Press .
Press .