Kenwood KDC-320UI Bedlenungsanleitung Seite 9

GETTING STARTED
DISPLAY
EASY MENU
(For
When entering [FUNCTION]...
ON: ZONE 1 illumination changes to white color. ;
OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 21)
• ZONE 2 illumination changes to light blue color when you enter [FUNCTION],
irregardless of the [EASY MENU] setting.
• Refer to the illustration on page 21 for zone identification.
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/
FM2/FM3/MW/LW). ; MIX: Memorizes one station for each preset button,
regardless of the selected band.
SYSTEM
KEY BEEP *
ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
SPOTIFY SRC ON: Enables SPOTIFY in source selection. ; OFF: Disables. ( 10)
BUILT-IN AUX
ON: Enables AUX in source selection. ; OFF: Disables. ( 7)
P-OFF WAIT Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in standby
mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ; – – –: Cancels
CD READ 1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces
to play as a music CD. No sound can be heard if an audio file disc is played.
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.
* Not applicable if 3-way crossover is selected.
)
FACTORY RESET YES: Resets the settings to default (except the stored station). ;
NO: Cancels
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is
turned off. ; OFF: Cancels.
ENGLISH
Select the display language for [FUNCTION] menu and music
РУССКИЙ information if applicable.
By default, [ENGLISH] is selected.
ESPANOL
Change the crossover type
1
Press repeatedly to enter STANDBY.
2
Press and hold number buttons 4 and 5 to enter crossover
select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then press
the knob.
4
Turn the volume knob to select "YES" or "NO", then press the
knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, ( 19).
Caution
Select a crossover type according to how the speakers are
connected. ( 30)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.
ENGLISH
5