Hameg HMP4030 Handbuch Seite 43

Command
:CLEar
:MODE {MEASured | PROTected}
:MODE?
Electronic fuse activation
FUSE
[:STATe] {ON | OFF | 0 | 1}
[:STATe]?
:DELay { delay | MIN | MAX}
< >
:DELay?
:LINK {1 | 2 | 3}
:LINK? {1 | 2 | 3}
:UNLink {1 | 2 | 3 }
:TRIPed?
Reading back of the current or voltage setting
MEASure
[:SCALar]
:CURRent [:DC]?
[:VOLTage] [:DC]?
Memory locations
*SAV {0|1|2|3|4|5|6|7|8|9}
*RCL {0|1|2|3|4|5|6|7|8|9}
Arbitrary
ARBitrary
:DATA voltage1, current1, time1, voltage2, current2,
<
time2, voltage3, ...
>
:TRANsfer {1|2|3}
:STARt {1|2|3}
:STOP {1|2|3}
:SAVE {1|2|3}
:RESTore {1|2|3}
:REPetitions {0...255}
:REPetitions?
:CLEar
Description
Reset fuse
measured: the return value of the instrument stands as a switching
threshold for the over voltage protection
protected: the adjusted value of the instrument stands as a
switching threshold for the over voltage protection
Setting of the Fuse Delay from 0ms to 250ms
Query of the Fuse Delay
Combination of channel fuses (Fuse Linking); the fuses can be
linked together for up to 3 channels (at HMP2020 up to
2 channels)
Query of the combined fuses
If for example the FUSE of channel 1 is connected with FUSE of
channel 2, a „1" is returned; when the FUSE of channel 1 is not
connected to the FUSE of channel 2, it returns a „0".
Unlinking of the channel fuses
Query, if the fuse has triped
Returning of the measured instrument current value
Returning of the measured instrument voltage value
Saving of the settings in the memory locations 0...9
Recalling of the memory locations 0...9
Arbitrary data is transmitted to the corresponding channel
Starting of the Arbitrary function of the corresponding channel
Stoping of the Arbitrary function of the corresponding channel
Up to 3 waveforms can be saved
Loading of one of the saving waveforms
Max. 255 repeats, „0" stands for infinite repetition
Query of the repetitions
Delition of the Arbitrary values
R e m o t e - C o n t r o l
Subject to change without notice
43