Programming The Master Card - Assa Abloy ANYKEY Bedienungsanleitung

Sicherheitsbeschlag mit integrierter Zutrittskontrolle

2 . 4 Programming the Master Card

The first card that you program after the installation of the fitting automatically becomes the Master Card.
Caution
An access by unauthorised persons is possible! There is a security leak here.
You should program the Master Card immediately.
If you want to leave the fitting in the original installation state, this can be activated with any cards.
Notice
You can program any card to be the Master Card. However we recommend that you use the delivered
card that has Master Card printed on it.
Ensure that the external door handle is activated.
Notice
If you hear five short bleeps or if a different sequence of flashing lights is displayed, then the programming
has failed. The old Master Card continues to be valid. Read through the described sequence once more
and then reprogram the Master Card.
The new Master Card is now active.
The external door handle is deactivated.
Use this new Master Card for all other programming procedures.
Seite 38
Start the programming.
Whilst the indicators are flashing, hold the card in front of the card
reader again.
Recognised and saved.
Programming of the Master Card has been completed successfully.
D00422
02