Assa Abloy ANYKEY Bedienungsanleitung Seite 41

2.6.1 Authorisation for temporary release
Notice
If you hear five short bleeps or if a different sequence of flashing lights is displayed, then the programming
has failed. The User Card has not been programmed. Read through the described sequence once more
and then reprogram the User Card.
The new User Card with authorisation for temporary unlocking is now active.
The programmed User Card can now be used.
2.6.2 Authorisation for permanent release
Notice
If you hear five short bleeps or if a different sequence of flashing lights is displayed, then the programming
has failed. The User Card has not been programmed. Read through the described sequence once more
and then reprogram the User Card.
The new User Card with authorisation for permanent release is now active.
The programmed User Card can now be used.
D00422
02
Start the programming.
Whilst the indicators are flashing, hold the card in front of the card
reader.
Recognised and saved.
Programming of the User Card has been completed successfully.
Start the programming.
Whilst the indicators are flashing, hold the card in front of the card
reader again.
Whilst the indicators are flashing, hold the card in front of the card
reader.
Recognised and saved.
Programming of the User Card has been completed successfully.
Programming instructions
Seite 41