Setting Mode; Audible Signals - AEG Electrolux FAVORIT EXPRESS VI Benutzerinformation

• To deactivate/activate the rinse aid dispenser when the multitab function is on. Refer to
'What to do if...'.
• To cancel the washing programme in progress or a delay start in progress. Refer to 'Set-
ting and starting a washing programme'.
• To deactivate/activate the audible signals. Refer to 'Audible signals'.

Setting mode

The appliance must be in setting mode for these operations:
• To select and start a washing programme and/or a delay start.
• To adjust electronically the level of the water softener.
• To deactivate/activate the audible signals.
• To deactivate/activate the rinse aid dispenser.
Press the on/off button. The appliance is in setting mode when:
– The display shows two horizontal bars.
Press the on/off button. The appliance is not in setting mode when:
– The display shows the duration of a washing programme or a delay start.
– It is necessary to cancel the programme or the delay start to go back to the setting
mode. Refer to 'Setting and starting a washing programme'.

Audible signals

The audible signals indicate:
• The end of the washing programme.
• The electronic adjustment of the level of the water softener
• The appliance has a malfunction.
Do these steps to deactivate the audible signals:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C until the indicator lights of function buttons
A, B and C start to flash.
4. Release function buttons B and C.
5. Press the function button C.
– The indicator lights for function buttons A and B go off.
– The indicator light for function button C flashes.
– The display shows the current set.
6. Press the function button C again.
– The display shows the new adjustment.
7. Switch off the appliance to keep the operation.
Do the above procedure to activate again the audible signals.
Audible signals activated
Audible signals deactivated
9
Control panel