8
Control panel
Display
The display shows:
• The electronic adjustment of the level of the water softener
• Activation/deactivation of the rinse aid dispenser (only with multitab function on)
• The number of the washing programme
• Remaining time to the end of the washing programme
• The end of a washing programme (the display shows a zero)
• Remaining time to the end of the delay start
• Fault codes
• Activation/deactivation of the audible signals.
Delay start button
Press this button again and again to delay the start of the washing programme from 1 to
19 hours.
Programme buttons
Press one of these buttons again and again to set a washing programme. Each time you
press a button, the display shows a number that is related to a washing programme. Refer
to 'Washing programmes'.
Energy saver button
This function decreases the temperature in the drying phase. The power consumption de-
creases by 25%.
The dishes can be wet at the end of the programme when you open the appliance door. We
recommend that you keep the door ajar and let the dishes dry.
Press this button to activate the function. The related indicator comes on.
Multitab button
Press this button to activate or deactivate the multitab function. Refer to 'Multitab func-
tion'.
Half-load button
Use this function when it is necessary to start a washing programme with a small load.
The half-load function decreases the programme time and the consumption of water and
energy.
When you use this function, put the load in the two baskets and decrease the detergent
quantity.
Set the half-load function before the start of a washing programme. It is not possible to set
the function while a washing programme operates.
The half-load function is not available for all washing programmes. Refer to 'Washing pro-
grammes'.
Press the half-load button. If the function is available, the related indicator comes on .
Function buttons
Use the function buttons for these operations:
• To adjust electronically the level of the water softener. Refer to 'Setting the water soft-
ener'.