Programme Selection Buttons; Multitab Button; Delay Start Button; Digital Display - AEG Electrolux FAVORIT AAAUTO Benutzerinformation

32
Control panel
1)
1)
1) The indicator light is off when a washing programme operates.

Programme selection buttons

With these buttons you can select the washing programme. Press a programme button,
the related indicator light comes on. Refer to 'Washing programmes' chapter for more data
about the washing programmes.

Multitab button

Press this button to activate/deactivate the multitab function. Refer to the chapter 'Multitab
function'.

Delay start button

Use the delay start button to delay the start of the washing programme with an interval
between 1 and 19 hours. Refer to the chapter 'Setting and starting a washing programme'.

Digital display

The display shows:
• the set level of the water softener.
• Remaining time to the end of the programme.
• Activation/deactivation of the rinse aid dispenser (only with multitab function on).
• End of the washing programme. The display shows a zero.
• Number of hours in delay start.
• Fault codes.

Function buttons

Use the function buttons for these operations:
• To set the water softener. Refer to the chapter 'Setting the water softener'.
• To cancel the washing programme in progress or a delay start in progress. Refer to the
chapter 'Setting and starting a washing programme'.

Setting mode

The appliance must be in setting mode for these operations:
• To set a washing programme.
• To set the water softener level.
• To deactivate/activate the rinse aid dispenser.
Indicator lights
The indicator light comes on when the washing
programme is completed.
The indicator light comes on when it is necessary
to fill the salt container. Refer to the chapter 'Use
of dishwasher salt'.
The salt indicator light can stay on for some
hours, but it does not have an unwanted effect
on the operation of the appliance.
The indicator light comes on when it is necessary
to fill the rinse aid. Refer to the chapter 'Use of
rinse aid'.