Setting And Starting A Washing Programme - AEG Electrolux FAVORIT EXPRESS I Benutzerinformation

18

Setting and starting a washing programme

Consumption values
Programme
AUTO 45-70°
INTENSIV CARE 70° -
30 MIN 60°
ECO 50°
GLASS 45°
1 HOUR 55°
1) The digital display shows the programme duration.
The pressure and temperature of the water, the variations of power supply and the quantity
of dishes can change these values.
Setting and starting a washing programme
Set the options before the start of a washing programme. You cannot set an option when
a washing programme operates. If it is necessary to set an option, cancel the washing
programme.
Set the washing programme with the door ajar. The washing programme only starts after
you close the door. Until then it is possible to modify the settings.
Do these steps to set and start a washing programme:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Select a washing programme. Refer to the chapter 'Washing programmes'.
– The related programme indicator light comes on.
– All other programme indicator lights go off.
– The digital display shows in flashing the programme duration.
4. Close the door. The washing programme starts automatically.
You can select the washing programme and delay start also with the door closed. When
you press a programme button you have only 3 seconds to select a different washing
programme or a delay start. After these 3 seconds, the selected programme starts auto-
matically.
When the washing programme operates, you cannot change the programme. Cancel the
washing programme.
WARNING!
Only interrupt or cancel a washing programme if necessary.
CAUTION!
Open the door carefully. Hot steam can come free.
Duration (in minutes)
-
-
-
-
-
1) Energy (in kWh)
1,1 - 1,7
1,5 - 1,7
0,9
1,0 - 1,1
0,8 - 0,9
1,0 - 1,2
Water (in litres)
12 - 23
16 - 18
9
12 - 13
14 - 15
11 - 12