Acoustic Signals - Electrolux ESL4300LO Benutzerinformation

• The indicator
The number of flashes indicates
the level.
– E.g. 5 flashes + pause + 5
flashes = level 5.
3. Press again and again to
change the setting. Each time you
press the level number
increases. After level 10 you will start
again from level by 1.
4. Press the on/off button to confirm the
setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
Use of rinse aid and multi-tablets
When you activate the option Multitab, the
rinse aid dispenser continues to release
rinse aid. However you can deactivate the
rinse aid dispenser. In this case the drying
results may not be satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
2. Press
• The indicators
off.
• The indicator
to flash.
starts to flash.
and
,
start to flash.
.
and a go
continues
• The end indicator indicates the
current setting: End indicator on =
rinse aid dispenser activated.
3. Press
setting. End indicator off = rinse aid
dispenser deactivated.
The rinse aid indicator goes off.
4. Press the on/off button to confirm the
setting.

6.4 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode press and
hold simultaneously
until the indicators
and
2. Press
.
• The indicators
go off.
• The indicator
• The indicator
3. Press to change the setting.
• The indicator
acoustic signal for the end of
programme is activated.
4. Press the on/off button to confirm the
setting.
ENGLISH
to change the
and
,
start to flash.
and
continues to flash.
is off.
comes on. The
9