Acoustic Signals - Electrolux ESF5533LOW Benutzerinformation

10 www.electrolux.com
1. To enter the user mode, press and
hold simultaneously Delay and Start
until the indicators
and the display is blank.
2. Press Options.
• The indicators
are off.
• The indicator
flashes.
• The display shows the current
setting.
–
–
3. Press Options to change the setting.
4. Press on/off to confirm the setting.

6.4 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and Start
until the indicators
display is blank.
2. Press Delay.
• The indicators
and
• The indicator
• The display shows the current
setting:
, and start flashing
,
= rinse aid empty
notification activated.
= rinse aid empty
notification deactivated.
, and flash and the
,
are off.
flashes.
,
3. Press Delay to change the setting.
4. Press on/off to confirm the setting.
6.5 AirDry
and
AirDry improves the drying results with
less energy consumption.
still
AirDry is automatically activated with all
programmes excluding
To improve the drying performance refer
to the XtraDry option or activate AirDry.
,
How to deactivate AirDry
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and Start
until the indicators
– = Acoustic signal off.
– = Acoustic signal on.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
CAUTION!
If children have access to
the appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
.
,