Truma Trumatic S 3002 P Gebrauchsanweisung Seite 10

18. Fit the Mignon battery provided into the automatic igni-
tor (12). Ensure the polarity is correct.
19. Place the heating cladding in place (take care to ensure
that the cable does not get caught):
S 3002 up to year of manufacture 05/96: Suspend the
cladding in the top of the installation box. Guide the operating
handle into the handle sleeve and engage the cladding at the
bottom.
S 3002 as from year of manufacture 05/96: Place the
cladding on the lower retaining lugs (I). Guide the operating
bar into the handle sleeve from below, and engage the clad-
ding at the top. Push the operating handle into position from
above in such a way that the arrow points to the "0" position.
10