Whirlpool AMD 054 Gebrauchsanweisung Seite 40

DIY SLEEP mode
will display on remote control during this
3
mode.
This mode allows you to set your own sleep
mode.
How to set your own sleep mode
• Under this mode, press SUPER SILENT
button and hold it till the temperature display
blinks, you can see "1 hour" is displayed
under it.
• Use + and – buttons to set your desired
temperature and confirm it by pressing
SUPER SILENT button.
• Then the time will automatically change to
"2 hour" and temperature display keeps
blinking, repeat above operation to set your
desired temperature for hour 3~8.
• Once you confirm the setting for hour 8,
your own sleep mode is set and the remote
control display will go back to previous
setting.
Note: During above operations, if there is no
button pressed within 10s or press "on-off"
button, "mode" button, "timer" button,"clock"
or "sleep" button, it will quit setting status
automatically and display previous setting.
How to check your own sleep mode setting
Follow above operations to enter setting status,
just press SUPER SILENT button continuously to
check the temperature for each hour.
How to change your own sleep mode setting
same as "set your own sleep mode".
Note:
• Fan speed and airflow direction can be adjusted.
• Under FAN only and 6th SENSE mode, this
function is not available.
• Only STANDARD SLEEP is available under
Dehumidifying operation.
40