Whirlpool AMD 054 Gebrauchsanweisung Seite 38

MODE AND FUNCTION DESCRIPTIONS
6th SENSE MODE
Press the button,
enters 6th sense mode directly.
In this mode, temperature and fan speed will be
automatically set based on the actual room
temperature.
Heat pump models
Indoor
temperature
22°C or below
22°C-26°C FAN or keep previous mode
26°C or over
Button is ineffective in Jet and Sleep mode.
Note: Temperature will not be displayed on front
panel and remote control under this mode.
What you can do in 6th sense mode
Your feeling
Uncomfortable because of unsuitable
air flow volume.
Uncomfortable because of unsuitable
air flow direction.
Around U function
When you press this button,
remote control transmits the actual room
temperature around it to the indoor unit,
and the appliance will operate according to this
temperature to let you feel more comfortable.
Please keep the remote control in a location
where it can transmit the signal to the indoor unit
properly.
Press once to set and press again to cancel.
will display, the appliance
Operation mode
HEATING
COOLING
button
will display,
adjustment procedure
Indoor fan speed alternates among High, Medium
and Low each time this button is pressed.
Please refer to the previous chapter "Airflow
direction control"
38