USING THE OVEN WITH THE DIGITAL
TIMER
The digital timer is designed to switch the oven off once the set cooking time has elapsed. A symbol (8 -
pots) lights up in the centre of the display to confirm activation or switching off of the timer. The time
display remains lit throughout.
The digital timer is mains powered only, so in the event of a power cut, when power is restored the timer
remains switched off (the digits 0.00 + symbol 6 flash) and the time will have to be set again.
1. Button for setting the acoustic signal
2. Button for setting cooking time
3. Button for setting end of cooking time
4. Decrease button (-)
5. Increase button (+)
6. Symbol "A" – remains lit from start to end of cooking. At the
end of cooking, the symbol "A" flashes.
7. Timer symbol
8. Symbol lights up when the oven is in use.
THE OVEN HAS TWO OPERATING MODES
• Without the use of the digital timer (in this case the pot symbol (8) should be lit: if it is not, press
buttons 2 and 3 at the same time, otherwise the oven will not switch on). In addition, the oven is
operated with two control knobs - the temperature selector and the oven function selector.
• With the help of the digital timer (for timer use, see paragraph below). The temperature and cooking
function must be selected using the oven control knobs.
SETTING THE TIME FOR THE DIGITAL TIMER
When the appliance is connected to the mains, the symbol 0.00 flashes on the display. Press buttons 2 and
3 at the same time to set the correct time of day (the digits 0.00 and the symbol 8 light up). At this point,
use buttons 4 and 5 to set the correct time on the display.
MANUAL OVEN USE
If you wish to use the oven manually without setting the timer, the symbol 6 must not be lit.
Check the timer clock: if the symbol 6 is lit, press buttons 4 and 5 at the same time. Only once the
symbol 6 has switched off can the oven be used manually without the timer.
The digital timer lets you programme oven operation, choosing one of two modes:
SEMI-AUTOMATIC
- the oven switches on immediately and switches off automatically after the set cooking time has elapsed
AUTOMATIC
- the oven is programmed to switch on and off automatically.
SEMIAUTOMATIC FUNCTION
This function lets you set the oven cooking time (duration). The maximum programmable cooking time is
23 hours and 59 minutes!
SEMIAUTOMATIC FUNCTION
Example for easier understanding:
The required cooking time is 1 hour and 20 minutes (1.20).
• Setting duration: Press button 2 (0.00 and the symbol 8 light up on the display) then press button 5
until the value 1.20 is shown. During setting the symbol 6 also lights up. After 5 seconds the time of
day and the symbol 6 light up.
Switch on the oven: using the control knobs, select the desired oven function and temperature.
The oven switches on immediately (cooking starts); the symbols 6 and 8 remains lit during cooking.
26