Maintenance; Inspection And Maintenance; Cleaning And Lubrication - Husqvarna 115iHD45 Bedienungsanweisung

Inspection and maintenance

WARNING! Always remove the battery
!
before any maintenance on the machine.
IMPORTANT! Never clean the battery or the battery
charger with water.
Strong cleaning agents can damage the plastic.
All servicing and repair work on the machine requires
special training. This is especially true of the machine's
safety equipment. If your machine fails any of the checks
described below you must contact your service agent.
When you buy any of our products we guarantee the
availability of professional repairs and service. If the
retailer who sells your machine is not a servicing dealer,
ask him for the address of your nearest service agent.
Only use original spare parts.
Regularly check that the battery charger and the battery
are intact. (Figure 24) (Figure 25)
Cleaning
Gloves should be worn when necessary.
Clean the machine after use.
Make sure the battery and battery charger are clean and
that the terminals on the battery and the battery charger
are always clean and dry before the battery is placed in
the battery charger. (Figure 22)
Keep the battery guide tracks clean. Clean plastic parts
with a clean and dry cloth.

Cleaning and lubrication

Clean any resin and plant residue from the blades using
cleaning agent before and after using the machine.
Check that the blade edges are not damaged or
deformed. File away any burrs. Check that the blades
move freely.
Lubricate the blade with special oil before long periods of
storage. (Figure 23)
16 – English

MAINTENANCE