Troubleshooting; Possible Cause - Scheppach Nts20 Se Originalbetriebsanleitung

13. Troubleshooting

Fault

Possible cause

Check whether the plug is plugged in.
Check whether there is power to the
Engine does not run.
socket.
Check whether the on/off switch is
switched on.
The brush is blocked.
Reduced vacuuming
power.
The dust bag is full of dust.
Filter is full of dust.
22 | GB www.scheppach.com / service@scheppach.com
Remedy
Plug the mains plug back in to the socket.
Call an electrician.
Switch the on/off switch on.
Switch the vacuum cleaner off to remove the
blockages.
Remove and empty the dust bag.
Remove and empty the filter.