HOW TO USE THE MENU FUNCTIONS
DISPLAY AND SELECTION IN THE <MENU>
SCREEN MODE (SETTING)
You can set the following menu items.
Set them depending on your needs.
•
SHARPNESS (to adjust picture sharpness)
•
COLOR SYSTEM (to adjust colour system)
1. Press the MENU button.
The <MENU> screen is displayed.
MENU
* The screen automatically disappears when no operation is
performed after about 5 minutes.
2. Press the PHASE (
to select MENU items.
A selection mark (3) is put next to the selected item.
PHASE CHROMA
Front panel
button
SHARPNESS
PHASE (
COLOR SYSTEM
CHROMA (
ASPECT
3. Press the VOLUME/SELECT buttons to set.
Front panel
button
VOLUME/SELECT
–
+
Menu items
SHARPNESS
Picture sharpness
COLOR
Colour system
SYSTEM
ASPECT
Aspect ratio
4. If you want to set the other menu items, repeat
procedures 2 and 3.
5. Press the MENU button to quit.
Front panel
MENU
button
•
ASPECT (to adjust aspect ratio)
) or CHROMA (
Function
displayed
∞
)
Forward selection mark (3)
5
)
Reverse selection mark (3)
Function
displayed
+
Increase (to max. value)
VOLUME/
SELECT (+)
3
Forward the setting value
–
Decrease (to min. value)
VOLUME/
2
Reverse the setting value
SELECT (–)
Purpose
–10 ~ 0 ~ 10
AUTO
4 – 3 NORM
Function
displayed
Quit (or Release) the <MENU>
MENU
EXIT
screen
) button
Contents
Contents
Setting range
NTSC
PAL
4 – 3 UNDER
16 – 9
Contents
<MENU> screen
< MENU >
‰SHARPNESS
:
0
COLOR SYSTEM
: AUTO
ASPECT
: 4 – 3NORM
EXIT
PHASE CHROMA BRIGHT CONTRAST
MENU
VOLUME/SELECT
–
<Front panel buttons>
1
Selection mark (3): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (7 buttons on
the left) correspond to the function
displayed.
Function
Contents
displayed
∞
Forward the menu item.
5
Reverse the menu item.
–
Lower the adjustment
value. (to the minimum)
+
Raise the adjustment
value. (to the maximum)
3
Forward the setting value.
2
Reverse the setting value.
EXIT
Exits the <MENU> screen.
Notes:
● When the screen aspect ratio is set to
16 - 9 (16:9) in ASPECT, the picture
will be vertically reduced.
● When the screen aspect ratio is set to
4–3 UNDER in ASPECT, the picture
is underscanned with an aspect ratio
of 4:3. When the screen aspect ratio
is set to 4–3 NORM in ASPECT, the
picture is scanned normally with an
aspect ratio of 4:3.
+
7