JVC KW-V20BT Bedienungsanleitung Seite 26

BLUETOOTH BLUETOOTH
Pairing a Bluetooth device using a PIN code (for
Bluetooth 2.0)
1
Display the <Bluetooth Setup> screen.
On the <HOME > screen:
26
2
Change the PIN code.
• If you skip changing the PIN code, go to step
3.
• The PIN code is initially set to "0000".
• The maximum number of digits in the PIN
code is 16.
• Press [ ] to delete the last entry.
• Bluetooth connection by <Audio
Connection> is only available when "BT
Audio" is selected as the source.
3
Search "JVC Unit" from your Bluetooth
device.
4
Select the "JVC Unit" for your Bluetooth
device.
JVC Unit
• If the PIN code is required, enter "0000"
(initial).
PIN code
0000
OK
When pairing is complete, the device is listed on
<Connect Device> .
• To use the paired device, connect the device
on <Connect Device> . (Page 27)