JVC KW-V20BT Bedienungsanleitung Seite 15

iPod/iPhone iPod/iPhone
Setting <AV Input> for iPod/iPhone
playback
Select an appropriate input setting for <AV Input>
according to the connection method of the iPod/
iPhone.
• For KW-V40BT : Make sure that "AV Off" is selected
as the rear source. (Page 24)
1
Turn off the AV source.
On the <HOME> screen:
2
Display the <Input> setting screen.
3
[AV-IN ]
Select this when the iPod/iPhone is
connected using the USB 2.0 cable
(accessory of the iPod/iPhone).
[iPod]
Select this when the iPod/iPhone is
connected using KS-U59 (optional
accessory).
Playback operations
• When the operation buttons
are not displayed on the screen,
touch the area shown on the
illustration.
– For KW-V10 : You can also
display/hide the operation
buttons by pressing FNC on
the monitor panel.
– To change settings for video
playback, see page 34.
Indications and buttons on the source
control screen
1 2 3
5
6
Playback information
1 Playback mode (Page 16)
2 Playing time
3 Playback status (I: play/W: pause)
4 Song/video information
• Touching the information bar scrolls the text if
not all of the text is shown.
5 Track no./Total track number
6 Artwork (Shown if the song contains Artwork)
• To change the Artwork display, see page 14.
4
ENGLISH 15