Introduction; Device Description (Fig. 1); Scope Of Delivery; Proper Use - Scheppach 39088029953 Originalbetriebsanleitung

1. Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new device brings you much enjoy-
ment and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
Note:
Read the whole text of the operating manual before
assembly and commissioning.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the de-
vice, for avoiding danger, for minimising repair costs
and downtimes, and for increasing the reliability and
extending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must
be read and carefully observed by all operating per-
sonnel before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description (Fig. 1)

1. Engine switch
2. Throttle
3. Right steering lever
4. Transport tray
5. Chain
6. Transmission
7. Gear selector lever
8. Engine
9. Left steering lever
10. Coupling lever
Engine (Fig. 13 - 14)
11. Throttle
12. Exhaust pipe
13. Spark plug
14. Air filter
15. Fuel valve
16. Choke lever
17. Reverse starter
18. Pull starter
19. Engine switch
20. Fuel filler cap
21. Fuel tank
22. Oil drain screw
23. Oil filling opening / oil dipstick

3. Scope of delivery

A. Machine
B. Transport handles
C. Protective guard with handle
D. Tilt lever
E. Left side wall
F. Front side wall
G. Transport tray base plate
H. Right side wall
I. Enclosed accessories bag
a. Bolts with washers and split pins (1x)
b. Hexagon screw with nut (M8 x 30 mm) (2x)
c. Split pin (3 x 20 mm) (6x)
d. Hexagon screws with two washers and self-lock-
ing nuts (M8 x 35 mm) (2x)
e. Hexagon screws with two washers and one
self-locking nut (M8 x 30 mm) (2x)
f. Cylinder screws with spring washers and wash-
ers (M8 x 25 mm) (4x)
g. Cylinder screws with spring washers, discs and
spacers (M8 x 30 mm) (2x)
J. Operating instructions

4. Proper use

The machine may only be used in the intended man-
ner. Any use beyond this is improper. The user/opera-
tor, not the manufacturer, is responsible for damages
or injuries of any type resulting from this.
www.scheppach.com
GB | 25