Technical Data - Scheppach 5907705903 Originalbetriebsanleitung

m WARNING
• In accordance with the applicable regulations, the
device must never be operated in the drinking wa-
ter network without a system separator. Make sure
that the connection of your household water system,
on which the high-pressure cleaner is operated, is
equipped with a system separator in accordance
with EN 12729 type BA.
• Water that has run through a system separator is no
longer considered drinking water.
• High-pressure hoses, fixtures and couplings are im-
portant for device safety. Only use high-pressure
hoses, fixtures and couplings recommended by the
manufacturer.
• When disconnecting the inlet or the high-pressure
hose, hot water can escape from the connections
after operation.
m CAUTION
• When selecting the storage location and during
transport, note the weight of the device (see tech-
nical data) in order to avoid accidents or injuries.
• Uninterrupted use of the device for several hours
can lead to numbness in the hands in rare cases.
• Wear gloves.
• Keep hands warm.
• Take regular breaks from work.
Working with a cleaning agent
m WARNING
• This device has been developed for the use of
cleaning agents that are supplied or recommend-
ed by the manufacturer. The use of other cleaning
agents or chemicals may affect the safety of the
device.
• Incorrect use of cleaning agents can cause severe
injuries or poisoning.
• Keep cleaning agents out of the reach of children.
Safety devices
m CAUTION
• Safety devices are used to protect the user and
must not be changed or bypassed.
Personal protective equipment
m CAUTION
• Wear suitable protective clothing and safety gog-
gles to protect against splashing water or dirt.
24 | GB
• Aerosols can develop when using high-pressure
cleaners. Inhaling aerosols can cause damage
to your health. Depending on the application, ful-
ly shielded nozzles (e.g. surface cleaners) can
be used for high-pressure cleaning, which signif-
icantly reduce the emission of aqueous aerosols.
The use of such shielding is not possible in all ap-
plications. If the use of a fully shielded nozzle is not
possible, a respirator of class FFP 2 or compara-
ble, depending on the environment to be cleaned,
must be used.
Residual risks
Even when this power tool is operated properly,
residual risks still remain. The following hazards
may arise in connection with the design and con-
struction of this power tool:
• Lung damage if suitable dust protection mask is not
worn.
• Hearing damage if suitable hearing protection is not
worn.
• Damage to health resulting from hand/arm vibration
if the device is used over an extended period of time
or if it is not properly operated and maintained.
Warning! This power tool generates an electromagnet-
ic field during operation. This field can impair active or
passive medical implants under certain circumstances.
In order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the power tool.

6. Technical data

Mains voltage
Power consumption
Working pressure
Rated pressure
Delivery rate
Max. water supply pressure
Protection class
Weight
Protection category
www.scheppach.com
230-240 V~ / 50 Hz
2400 W
12 MPa
18 MPa
5.5 l/min
0.4 MPa
II
10.1 kg
IPX5